Creating an outstanding dining experience for customers is both an art and a science. The art comes from chefs and business owners who are passionate about food, flavour and have flair for creating an outstanding customer experience. The science from the importance of getting aspects like food quality and safety right, particularly in regards to food temperature.
Food safety is almost the antithesis of what makes a great hospitality venue. The foundation of safe food is all about attention to detail, process and consistency. From handling to storing of fresh, raw and cooked food. Having a proven and well understood approach across your business, from initial purchase of ingredients through to correct food storage is critical to minimising food safety risks.
Avoiding the ‘danger zone’ – temperature is key to keeping your food safe
Key to the science of food preparation and storage is avoiding the so-called ‘danger zone’, where food at temperatures between 5°C and 60°C. At these temperatures bacteria is more likely to grow faster and the risk of food poisoning increases. This can be a real challenge in a hot, busy environment like a commercial kitchen. Bacteria can double in number in as little as 20 minutes between 5°C and 60°. In a commercial fridge, bacteria is prevented from growing if a tight temperature control of between 0 and 4°C is maintained inside the fridge.
Places like kitchens and sculleries are often subject to high ambient temperatures. With all the activity and appliances running, the ‘room’ temperature can run in excess of 45°C. This poses a number of challenges in regards to refrigeration.
Each type of fridge or freezer will have an optimum temperature that it is set to and will stay at while the door is closed and operating. However, once the door is opened, warm kitchen air rushes in replacing the lost cold air and bringing in moisture. This moisture can contain bacteria, which then condenses as it cools, falling like raindrops onto the food. As the cold air drops out the opened door, hot air flows in and the compressor and fans inside the fridge will stop to prevent further air from leaving, but the temperature inside the fridge still increases.
All fridges are not equal when it comes to food safety
When the temperature is fluctuating frequently (for example when the door is opened and closed frequently) and the fridge is working hard to maintain its optimum level, the quality and potentially the safety of your food is at risk. By getting a handle on this and maintaining a more consistent temperature level in your fridge, you are guaranteeing a higher quality level of food and reducing the risk associated with poorly stored food.
One way to do this is to restrict the amount of times that a door is opened and closed. This reduces the time the food is exposed to warm air outside the fridge but is not a viable solution during busy service hours.
Another way to look at the problem is to consider the accuracy of the temperature being recorded from inside the fridge – you will often see an increase in temperature when the door is opened. This is due to the cold air spilling out from the fridge and the temperature internally rising.
SKOPE has become aware over recent years of cheaper imported products entering the market that appear not to display a temperature increase on the controller. This may be down to the placement of the temperature probes inside the fridge and where the temperature is being logged. If the sensor or probe is placed where the cold air is spilling out (rather than where the returned air is circulating inside the fridge), you will see a decrease on the temperature display when the door is opened.
However, this is not only impossible, it is misleading and dangerous. Customers can easily
be fooled into believing their fridge is working as the temperature reading on the controller is moving up and down, but not necessarily understand what this means for food safety and safe product temperatures.
How cool is SKOPE?
SKOPE’s test objective is to guarantee average temperature readings inside the fridge within 0.5 accuracy. Our state-of-the art environmental test chamber has significantly increased testing capacity at SKOPE and is continually improving accuracy in temperature control for food safety.
SKOPE sets high standards to ensure customer expectations are exceeded. We design products that are made to last, with a focus on tight temperature control and rapid pull down of temperature, in the harshest of climates. This is proven in our latest ActiveCore technology. Below, is a graph taken from the MEPS (Minimum Energy Performance Standards) report, showing that an ActiveCore 2 door bottom mounted fridge not only has incredible temperature consistency inside the fridge but consistently holds temperature at below 5°C. The report measures the thermal properties of up to 476 MEPS packs (M packs) using dataloggers and probes to record the core temperature of each of pack throughout the cabinet. The M packs represent the same properties of perishable product, and comply with the ISO Standards for Performance Tests on Household and Commercial Appliances.
The test data shows internal temperature over a 24 hour period, at Climate Class 3 (Minimum Energy Performance Standards) in testing conditions of 25°C – 60% Relative Humidity. The graph lines show that the product remains between -1°C and +5°C for the duration of the test with minimal fluctuations and minimal energy consumption.
Air is the most commonly used heat transfer in refrigeration systems. We typically remove heat from a refrigerated space by circulating cooled air throughout the fridge. A good airflow pattern is critical to an even and consistent spread of chilled air onto a product. In SKOPE fridges, chilled air is pushed directly onto the product. It is a commercial refrigerator’s job to keep the product inside in optimal conditions for as long as possible, to ensure food safety. Many “market- standard” fridges fall well short of this objective.
A poor airflow pattern will result in fluctuations in a product’s core temperature affecting its flavour, quality and nutritional integrity. For food to remain safe, the internal temperature must not go higher than 5°ᶜ. Many inferior fridges can’t maintain these tight temperatures during busy periods and seasonally warmer temperatures, even though the temperature display may say otherwise. A good airflow pattern will keep tight cabinet temperatures, regardless of the frequency of outside fluctuations.
The selection of a fridge depends on several factors such as the type of food being stored, the volume of meals being prepared daily, and the frequency of the food being delivered to patrons (i.e. how many services being managed). Before selecting refrigeration equipment, check out our Guide to Commercial Refrigeration or talk to your local SKOPE representative, who can give you helpful advice.
Selecting the wrong type of fridge can make it hard to avoid that danger zone which significantly increases your risk of unsafe food.
What are your best options for different types of refrigeration to promote safe food?
- Beverage Fridges: intended solely for the storage and display of packaged beverage products such as carbonated beverages, beer and wine. They are not designed to store potentially hazardous foods, and are often the culprit in food safety incidents.
- Display Fridges: designed to display foods to the consumer for purchase in areas where environmental conditions are controlled and maintained. This type of fridge is designed to maintain a consistent, safe temperatures – not for cooling down.
- Rapid Pull-Down Fridges: also known as Blast Chillers, these are specifically designed for rapid chilling of food products. When used correctly these are ideal for the rapid cooling of hot foods.
- Food Preparation Fridges: designed with a refrigerated open top or open condiment rail. They include refrigerated sandwich units and pizza preparation for example. The fridges are designed to maintain foods at a safely cool temperature.
- Storage Fridges: cold storage for non-frozen foods between periods of preparation, service, display or sale. Could be referred to as “day” fridges because they are not intended for long-term storage of foods.
- Walk-in Fridges: enclosed, mechanically refrigerated and temperature controlled room with integrated walls, floor and ceiling used to maintain prescribed cold food at consistent temperatures. Probably the most widely used in food service.
SKOPE have 50 years’ experience keeping your drinks cold and food safe and are market leaders in energy efficient products. You can depend on us for the best in refrigeration and our unique ActiveCoreTM technology can help lower your operating costs. We offer the ability to customise the solutions to suit your requirements and you can rest easy with our superior warranty protection.
To understand more about the science of keeping food safe in your kitchen? We’ve prepared an eBook called “Why bad food is not cool; a practical guide to NOT destroying your kitchen’s reputation“. Download it now to read about ways to protect your reputation.